Cool-Space® 200 Support

FAQs

• About the Product +
  • How does the cooler work?
  • Does the cooler add humidity?
  • How much of a decrease in temperature does the cooler provide?
  • How much water does the cooler use?
  • Does the cooler spray or mist water?
  • How long does the cooling media (pads) last?
  • How effective is the cooler in humid climates?
• Trouble with Something Else +
  • Pump motor will not run when switch is turned on.
  • Pump motor hums when switch is turned on but does not pump water.
  • Breaker trips or fuse blows when switch is turned on.
  • Pump runs but does not pump water.
  • Floor at side of cooler is wet.
  • Water overflows from reservoir or is spitting through fan.
  • Water is spitting from the cooler.
  • Water is leaking from the drain plug.
  • There are too many dry streaks on the pads.
  • Cooler will not fill.
  • Scale and mineral buildup on cooling media.
  • Fan will not run and makes no sound.
  • Fan will not run and makes humming sound.
  • Breaker trips or fuse blows when fan starts.
  • Motor overheats, shuts off, and restarts several minutes later.
  • Fan motor will not run and switch makes soft clicking sound.
  • Fan blade does not turn and cooler makes squealing sound.
  • Fan will not reach speed but turns and makes humming sound.
  • How do I replace my cooler’s pump?
  • How do I replace my cooler’s fan motor?